Contact Us   Feedback
PRODUCT CATEGORY
CABLE TRAYS/ LADDERS
   Indoor Cable Trays / Ladders
   Indoor Cable Tray / Ladder Accessories
   Outdoor Cable Trays / Ladders
   Outdoor Cable Tray / Ladder Accessories
ANTENNA MOUNTS/ FIXTURES
   GSM Pole Mounts / Microwave Mounts
BTS MECHANICAL AND ELECTRICAL
   Wall Entry Plates for Feeder Cables
   PVC Feeder Clamps
   Stainless Steel Hangers
   BTS Ancillary Kits, Installation Material     & HDW Accessories
   Krone Products
   Jointing Sleeve, Insulating Cover
   Grounding Kits
   Grounding Bars & Ground Bar         Assemblies
   Weather Proofing Kit
   19” Communication / Microwave /
    Server Rack
STEEL FABRICATED PRODUCTS
   AC & DC Distribution Boards
   L.T. Incomer / Metering Panels /     
    SFU Boxes
   Power Distribution / Interface Unit
RF PRODUCTS
   RF Connector & Adaptors
   RF Components
   RF Co-axial Jumper Assemblies
   RF Cables
CABLES
   8/ 10/ 12/ 16 Pair PCM Cables
   Power / Grounding Cables
   Alarm Cables
   Cats / Cat6 Cables
FIBER DISTRIBUTION PRODUCTS
& ACCESSORIES
   Fiber Management System (FMS)
   Fiber Optic Connectors & Adaptors
   Pigtail & Patch Cords
   Splice Protection Sleeves
   Fiber Optic Attenuators
Products > BTS Mechanical and Electrical > Stainless Steel Hangers

The Hangers are commonly used on crowded towers. Once in place, cables are tighten in the calibrated shells with no risk of crushing the cable.

These stainless steel hangers can be rapidly fixed by clicking on to the flat tower members of 2 to 6 mm thickness. For round tower members, the hangers are simply attached with a stainless steel adaptor clamp.

The advised 1.00 meter hanger spacings have been calculated for wind velocity of 160 Km/h and 10 mm of radial ice. Should one of these variable being changed, then the spacing between hangers must be brought back to 0.60 meters.

The stackable hangers can accommodate multiple runs in the same space as the standard snap-in. These hangers can be stacked up to three at a time when using ½" and 7/8" cable and up to two when using 1-1/4" and 1-5/8" cable. These stainless butterfly clips mount on angle or round member adapter brackets. Mounting bolts are provided with BCH only. Standard tower configuration spacing is 3-4ft. (1-1.2m). Maximum spacing for outdoor installation is 6ft. (1.83m) at 125 mph (200 km/h) wind, ½" (13mm) radial ice. Required angle, round member or other adaptor (sold separately.)

Round Member Adaptor/ Hanger for ½" or 7/8" feeder cable.

Stainless steel clamp with bracket head used to mount Butterfly Clip Hangers and Dual Hanger Blocks to round tower legs or brace. Order according to size of tower leg or brace.

SS Clamp/ Hanger for ½" or 7/8" feeder cable along with Angle Adapter.

We also manufacture hangers for round tower members that are simply attached with a stainless steel adaptor clamp.

 
Request A Quote
Print This Page
Bookmark This Page
   Best view in 1024x768
                                               Home  |  Company Profile  |  Products  |   Quality Policy  |   Enquiry   |   Career
   Designed By : Cent Websoft Technologies
Copyright © 2015 Dipti Telecom >> All Rights Reserved.
DIPTI TELECOM